AS THE REALMANUFACTURER WE OFFER YOU SOMETHING REAL AND WORTHY(All the pictures below can be clicked to enlarge for you to see more clearly)
1. We offer you two different sizes: Regular size & Taller size, each size nearly same as the originalTake an intuitive perception for the regular size and taller size of the chair from the veneer part
2. We offer you 4 different grades of veneer / plywood
Average grade:single-sided painting, economically moulded. This is the cheapest version in the market most middle sellers offer.
With this grade plywood, there is a big gap between the seat and the back veneer, looks like the chair is ugly cutting into three parts.
Also, due to low cost, the veneer is not processed through ergonomics techniques, it is without the tilt of 15-degree angle of the original version, which means the comfort you feel when sitting in the original version is unable to be found with chair in this kind of veneer. Because the ergonomics design will take the weight off your lower spine, while the unprocessed one will get your lower spine suspend in midair.
Standard grade:elegantly moulded plywood, with narrow gap, but also without the ergonomics process.
The narrow gap will make the overal outlook of the chair much more beautiful, pls refer to the pictures below for the comparison
Comparison between big gap and narrow gap
Comparison between the big gap and narrow gap with the Original Eames Chair which is in black on the right and hs no gap at all
Higher grade:elegantly moulded, no gap
with the ergonomics tilt exactly the same with the original version, very comfortable that once you sit down you don't want to stand any more.
Exactly the same ergonomics tilt as the original version (black one is the Original Eames).
Luxury grade:elegantly moulded, no gap
with ergonomics tilt design exactly as the original version.
Double-sided painting, which is even more beautiful than the original version.
Single-side painting Vs double-sided painting
Original Painting (left) Vs Our double-sided painting (right)
No gap and Same tilt as the Original Version
3. We offer you 4 different grades of leather, you can choose based on your budget. But even the lowest grade, we use the good leather which can ensure at least 5 years quality.
The 4 grades of leather are:
Top grain leather
Full grain brand
Top grain leather is the First-Layer of the Cattle Leather. Italian leather is the most regular leather we use in the chair and furniture we offer, you can click http://www.barcelonachairfactory.com/leather to find more details about 4 differnet types of leather.
Generally speaking, normally we use Italian leather, if you ask for Aniline leather, we will use the AUTHENTIC Aniline leather, NOT the fake one. There are many middle sellers claiming their chairs are with Full Aniline Leather, but most of them are fake especially for the chair under $1000, which is just some soft leather from the bottom part of the calf. You can click http://www.barcelonachairfactory.com/compare-italian-leather-and-aniline-leather to know more details about this.
The full grain brand leather is now the toppest grade leather in furniture industry, it is authentic full grain leather 100% imported from the Italy supplier similar to Spinneybeck. Due to the rare quantity and unbeatable quality, at this moment, we can only offer black color and white color for the leather in this grade.
4. We offer you 4 different versions of legs.
Low grade version:made of steel with painting, cheapest in the cost, but easy to break. Only in black color.
Original version:made of aluminimum alloy, same as the legs of the Original Eames. Only in black color.
Revised version:made of alunimium alloy, the pattern of the glides is revised a little based on the original version. Only in black color.
Electroplating version:electroplated on the surface of the aluminium alloy, making the legs with a metal shiny gloss. This type of legs are usually used in the white Eames chair, NOT suggested used in other colors. You can compare them in the real pictures as below. Only in silver color.
Effect for different colors with different grades of legs
5. We offer you 3 versions of the cushions/pillows.
Unremovable version:In this version, you are unable to remove the cushions/pillows from the veneer.
Removable simple version:You can remove the cushions/pillows from the veneer, but it is a low grade of removable device, and after sometime, the position of the cushions may have some shift.
Removable elegant version:This is an upgrade version, with delicately designed device. You can remove the cushions/pillows from the venners for easy clean. What is more, with our forever maintenance policy, when they are worn with time, or damaged accidentally (such as scratched by pet), or if you want to change the color (such as from white eames to red eames), you will just spend a little for the replacement pillow/cushions at a low factory cost from us, without spending huge on an entire chair.
More details about the extraordinary quality technics we use on this chair
The plywood is the biggest part in this Eames style lounge chair, the quality of the plywood decides the quality of the whole chair and the period which you can put it in use.
The plywood is usually made by the glue machine and industrial thermocompressor as below, but with different raw material, the plywood is coming out with totally different quality.
If using the poplar to make the plywood, which is low in the cost, because the trees of this type is fast growing into wood,the inner density is very loose and very easy to have worm holes.
Below is the raw material of fast-growing poplar wood, you can see from the second picture, that the playwood made of fast-growing poplar is very easy to have worm holes, so it is very easy to break.
What we use is the pinewood, which is much higher in the cost and with much higher quality in density and quality. The picture below is the pinewood we use piece by piece in pile.
And after the glue machine, it will be like this:
And later they will be through further process of thermocompressor and curved:
So that is what kind of plywood in our chairs, the quality is totally different:
Contrast with the chairs made of low grade plywood, which are easy to break and have cracks:
To make a qualified chair, the veneer part will be proceeded through further technics to be with drilled holes and accessories.You can click the pictures to see bigger images to have a good view of the good quality of plywood we use.
And later with painting in the surface to have different grains and colors.
We use Italian leather as a regular standard in this chair and furniture we offer.
In the before, we use the Top Grain Real Calf Leather, which is First-Layer & Cattle Leather for the standard quality, you can click http://www.barcelonachairfactory.com/leather to find 4 differnet types of leather, and make a good comparison of the good material we use and the inferior material of bottom grain from some low-priced middle sellers.
There are many middle sellers claiming their chairs are with Full Italian Leather, but most of them are fake especially for the chair under $1000. Italian leather is very elegant but expensive in the cost, the middle sellers always want to make the biggest margin, so they use normal buffalo leather or even bottom grain calf leather to be so-called "Italian Leather". As a factory, we deal with different types of leather everyday, we can provide you explicit pictures and explanations to help you tell what the real Italian Leather is.
General speaking, Italian Leather is a calf leather produced in Italy and Europe, and needs to be imported into China first before using in the production for furniture or other items. Italian Leather has great reputation worldwide due to its high quality and highly developed process techniques.Compared with the normal calf leather, it is with higher density grains and much more exquisite gloss which you can tell from the picture, and when you touch it, you can feel it very very soft which the normal calf leather can not match.
We put the cushions made of Italian leather and normal calf leather together, so you can see the difference easily: http://www.barcelonachairfactory.com/Super-Grade-Barcelona-Chair
Recently with the process techniques highly rised in China, many leather factories import from Italian the raw materials and process it into finished leather in China, in this way, the cost of Italian leather is reduced much while the quality is most the same with the originally processed ones.Under this circumstances and with rising quantity of orders, we directly order Italian leather from the leather factory now and upgrade our products from real calf leather to Italian leather. You can click here to know better about this update: http://www.barcelonachairfactory.com/update-for-standard-quality
Instead of scattered and cheap foam, we use the complete whole block of high density sponge with 9-10 cm thickness to make the cushions, and the thickness and the elasticity can be adjusted on your request especially in bulk quantity.
It is anti-fire of US standard, with the poly foam in the surface to maintain. so the cushion is very elastic, enduring, and comfortable at the same time. There are some low-priced sellers in the market using Recycled Foam in the cushions.
You can click here to know more details for how to tell the two different sponges: http://www.barcelonachairfactory.com/sponge
Metal connections & Aluminium legs
We use Aluminimum Alloy to make the metal connections and the legs, not the cheap chromed version. And based on the color of the chair, we may paint into black or silver.
For the legs, we have two different versions, one is exactly the same as the original version, the other is updated version.
We make this Eames styles chair as much elegant as the original version, including the shock amount part. Not all the Eames styles lounge chair you get is with this part, but definitely with this part, the chair will be much more comfortable.
Walnut Charles Eames lounge chair and ottoman reproduction in black
- Model No.: BCFF2-1.1
- Price Specification: Price here is the Out-of-Factory (EXW) Price without any shipping fee or related fees. If you are drop buying and need shipping to door, for USA buyers, please click here and place the order on the website of our USA primary distributor, for buyers from other countries, please click here. You are also welcome to contact us to get a direct quotation to door and related details. 2-3 Days